lunes, 10 de septiembre de 2012

Motherboard Gama Baja


GA-M52S-S3P (rev. 2.0)

Processor
  1. Support for Socket AM2+/ AM2 processors: AMD Phenom™FX processor/ AMD Phenom™ processor/ AMD Athlon™ 64 FX processor/AMD Athlon™ 64 X2 Dual-Core processor/AMD Athlon™ 64 processor/AMD Sempron™ processor
(Note) If you install AMD AM2+ CPU on AM2 motherbord, the system bus speed will downgrade from HT3.0(5200MHz) to HT1.0(2000 MT/s) spec; however, the frequency of AM2+ CPU will not be impacted. Please refer "CPU Support List" for more information.
Chipset
  1. NVIDIA® nForce 520
  2. Super I/O chip: ITE IT8716
  3. Integrated Peripherals
    1. Realtek RTL8110SC Gigabit Ethernet controller
    2. Realtek ALC888 Audio Codec
Memoria
  1. 4 DDR2 DIMM memory slots (supports up to 16GB memory)(Note 1)
  2. Supports dual channel DDR2 800/667/533/400 DIMMs
  3. Supports 1.8V DDR2 DIMMs
(Note 1) Due to the limitation of Windows 32-bit operating system, when more than 4GB of physical memory is installed, the actual memory available for the operating system will be less than 4GB; Windows 64-bit operating system doesn't have such limitation.
Internal I/O Connectors
  1. 1 24-pin ATX power connector
  2. 1 4-pin ATX 12V power connector
  3. 1 floppy connector
  4. 1 IDE connectors
  5. 4 SATA 3Gb/s connectors
  6. 1 CPU fan connector
  7. 1 system fan connector
  8. 1 front panel connector
  9. 1 front audio connector
  10. 1 CD In connector
  11. 1 SPDIF In/Out connector
  12. 3 USB 2.0/1.1 connectors for additional 6 USB 2.0/1.1 ports by cables
  13. 1 Power LED connector
  14. 1 Chassis Intrusion connector
I/O
  1. 1 PCI Express x 16 slot
  2. 2 PCI Express x 1 slot
  3. 4 PCI slots
Rear Panel I/O
  1. 1 PS/2 keyboard port
  2. 1 PS/2 mouse port
  3. 1 coaxial S/PDIF Out port
  4. 1 optical S/PDIF Out port
  5. 4 USB 2.0/1.1 ports
  6. 1 parallel port
  7. 1 serial port
  8. 1 RJ-45 port
  9. 6 audio jacks (Line In / Line Out / MIC In/Surround Speaker Out (Rear Speaker Out)/Center/Subwoofer Speaker Out/Side Speaker Out)
Power
  1. ATX power connector and ATX 12V connector
Diseño
  1. ATX form factor; 30.5 cm x 21.5cm
H/W Monitoring
  1. System voltage detection
  2. CPU / System temperature detection
  3. CPU / System fan speed detection
  4. CPU / System warning temperature
  5. CPU fan failure warning
  6. Supports CPU Smart Fan function(Note 2)
(Note 2) Whether the CPU Smart FAN Control function is supported will depend on the CPU you install.
BIOS
  1. 1 4Mbit flash ROM
  2. Use of licensed AWARD BIOS
  3. PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b
Other Features
  1. Supports @BIOS
  2. Supports Download Center
  3. Supports Q-Flash
  4. Supports EasyTune (only supports Hardware Monitor function)(Note 3)
  5. Supports Xpress Install
  6. Supports Xpress Recovery2
  7. Supports Xpress BIOS Rescue
(Note 3) EasyTune functions may vary depending on different motherboards.

No hay comentarios.:

Publicar un comentario